Factory Pre-Finishing
Dynamic factory finishing of windows and doors will provide a superior coverage that far exceeds any post delivery finishing. Applying the finish to all sides of the product, behind hinges, weather-strips and inside of glazing pockets cannot be easily accomplished after delivery. Applying factory pre-finish is especially important during wetter seasons when the windows & doors may be exposed to excessive moisture or humidity immediately after delivery. Dynamic's pre-finish options reduce the on-site finishing costs significantly while sealing and protecting the wood from moisture during the construction process.
 |
 |
Dynamic's pre-finishing options include:
- All factory painted components will be spray applied paint using Kynar Aquatec waterbased paint. (click here to learn more about Kynar Aquatec coatings )
- Optional water based wood conditioner is available for temporary protection when product is ordered unfinished
- All stained finishes will have spray applied, Low VOC European water-based 3 coat stain process in a wide offering of colors. (click here to learn more about Dynamic Euro-Stain )
- Optional sand blasted & wire brushed textured wood finishes are available on both exterior & interiors
- Extruded Aluminum clad paint finishes use state of the art architectural powder coatings that are AMMA 2605 compliant unless noted otherwise.
- Extruded Bronze clad finishes are available in a variety of factory applied patina colors.
In recent years the awareness of environmental risks and the resulting air quality of paints and stains has taken a much higher priority. All of Dynamic’s paint and stain choices are sensitive to these issues and both have been selected on the basis of reducing solvent emissions into the atmosphere, safeguarding the health of the user while providing an excellent aesthetic-quality result.